佳能730驱动-for win98 win2000 winxp

	本地下载： for win2000下载地址 for winXP下载地址 for win98下载地址	迅雷下载： for win2000下载地址 for winXP下载地址 for win98下载地址

                      **** IMPORTANT! ****
This is a legal agreement between you and Canon Inc. ("Canon")
and governing your use of LIPS printer driver software including
the related manuals, for Canon LASER SHOT,COLOR LASER SHOT,
MEDIO, and PIXEL Series'(the "Software").

READ CAREFULLY THIS AGREEMENT BEFORE INSTALLING THE SOFTWARE. IF
YOU DO NOT AGREE TO THE FOLLOWING TERMS AND CONDITIONS, DO NOT
INSTALL, COPY or USE THE SOFTWARE, AND PROMPTLY DESTROY IT:

1.  GRANT OF LICENSE
Canon grants you a personal, limited and non-exclusive license to
install and use only for the use with Canon LASER SHOT,COLOR
LASER SHOT, MEDIO,and PIXEL Series' (the "Printer") the Software
only on a single computer directly or via local area network
connected to the Printer (the "Designated Computer"). You may
allow other users of other computers connected to the local area
network in which your Designated Computer is contained (the "LAN
Users") to use the Software, provided that you must assure that
all such users shall abide by the terms of this agreement and
shall be subject to restrictions and obligations borne by you
hereunder.

2.  OTHER RESTRICTIONS
You may not install or use the Software on any hardware
configuration where the Software is accessible from any users
other than the LAN Users.

You may not assign, sublicense, sell, rent, lease, loan, convey
or transfer to any third party, or send or bring the Software out
of the country where you originally obtained it to other
countries without required authorization of applicable
governments, or copy, duplicate, translate or convert to another
programming language the Software, except as expressly provided
herein. You may not alter, modify, disassemble, decompile or 
otherwise reverse engineer the Software and you may not have any
third party to do so.

3.  COPYRIGHT NOTICE
You may not modify, remove or delete a copyright notice of Canon
and its licensors contained in the Software, including any copy
thereof.

4.  NO SUPPORT
CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, AND/OR DEALERS
ARE NOT RESPONSIBLE FOR MAINTAINING or HELPING YOU TO USE THE
SOFTWARE. NO UPDATES, FIXES or SUPPORTS WILL BE MADE AVAILABLE
FOR THE SOFTWARE.

5.  NO WARRANTY AND DISCLAIMER OF INDEMNITY
Canon, Canon's subsidiaries, their distributors, and/or dealers
will not guarantee uninterrupted service, or absence or correction of
errors. Therefore, the Software is licensed on an "AS IS" basis without
warranty of any kind.

CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, AND/OR DEALERS
DISCLAIM ALL IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT
TO THE SOFTWARE. NEITHER CANON, CANON'S SUBSIDIARIES, THEIR
DISTRIBUTORS, NOR DEALERS ARE LIABLE FOR ANY LOSS or DAMAGE
INCLUDING CONSEQUENTIAL or INCIDENTAL LOSS or DAMAGE SUCH AS LOSS
OF PROFITS, EXPENSE or INCONVENIENCE, WHATSOEVER CAUSED BY or 
ARISING OUT OF THE SOFTWARE or THE USE THEREOF.
CANON, CANON'S SUBSIDIARIES, THEIR DISTRIBUTORS, AND/OR DEALERS
SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM or 
SUIT BROUGHT BY ANY THIRD PARTY ALLEGING THAT THE SOFTWARE or THE
USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD
PARTY.

6.  TERM
The license granted hereunder is effective upon your acceptance
hereof by installing the Software and remains in effect until
terminated. You may terminate the license by destroying the
Software and all copies thereof, including those as used and/or
installed by LAN Users. The license granted hereunder will also
terminate if you or other LAN Users fail to comply with any term
hereof. Upon termination of the license, in addition to Canon
enforcing its respective legal rights, you and LAN Users must
then promptly destroy the Software and any copy thereof.

7.  U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE
The Software is a "commercial item," as that term is defined at
48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer
software" and "commercial computer software documentation," as
such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent
with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024
(June 1995), all U.S. Government
End Users shall acquire the Software with only those rights set
forth herein.

8.  SEVERABILITY
In the event that any provision hereof is declared or found to be
illegal by any court or tribunal of competent jurisdiction, such
provision shall be null and void with respect to the jurisdiction
of that court or tribunal and all the remaining provisions hereof
shall remain in full force and effect.

9.  ACKNOWLEDGEMENT
BY INSTALLING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ
THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS
AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE
COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND
CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL
PROPOSALS or PRIOR AGREEMENTS, VERBAL or WRITTEN, AND ANY OTHER
COMMUNICATIONS BETWEEN YOU AND CANON RELATING TO THE SUBJECT
MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE
UNLESS SIGNED BY A DULY AUTHORISED REPRESENTATIVE OF CANON.

Should you have any questions concerning this Agreement, or if
you desire to contact Canon for any reason, please write to
Canon's sales subsidiary or distributor/dealer, serving the
country where you obtained the Printer.

Canon Inc.
Supplement

===== Canon LIPS4 Printer Driver
                      for Microsoft Windows 2000/XP Ver. 4.71=====
                                    Copyright (c) 2002 Canon Inc.

Trademarks and Notices
o ColorGear, FontComposer, FontGallery, MaxiMam, LASER SHOT,
  PIXEL, and TypeWing are registered trademarks of Canon Inc.
o LIPS, NetSpot, and PageComposer are registered trademarks of
  Canon Inc.
o Microsoft and Windows NT are registered trademarks of Microsoft
  Corporation in the United States and/or other countries.
o Adobe Photoshop, Adobe, Aldus, PageMaker are trademarks of   
  Adobe Systems Incorporated and its subsidiary companies in the
  United States and/or other countries.
o MICROGRAFX is a registered trademark of Microfax Inc. of North
  America.
o Other products mentioned herein are registered trademarks of   
  their respective companies.
o In this document:
  Microsoft(R) Windows(R) 2000 is referred to as "Windows 2000"
  Microsoft(R) Windows(R) XP is referred to as "Windows XP".

CONTENTS

Overview
1. Introduction
2. System Requirements
3. Printer Driver Installation Methods

Using the LIPS 4 Printer Driver
1. Print Job Settings
2. Cautions, Limitations, Restrictions

Customer Service

===== Overview =====

1. Introduction

Thank you for choosing the Canon LIPS4 Printer Driver for

Microsoft Windows. This printer driver allows you to print
documents from any Windows application.

This printer driver has the following features:
o Convenient printer settings are provided as Profiles. You can
  also save custom made settings as Profiles.
o The printer driver's Object feature allows you to choose the
  most appropriate printing mode for your document simply by
  choosing the corresponding Object icon.
o The Preview screen shows the current settings for each sheet.
  You can view the Preview before print jobs to confirm the
  settings.

2. System Requirements

The following hardware and software are recommended for this
printer driver:

- Software: Microsoft Windows 2000 Professional/Server
            Microsoft Windows XP Professional/Home Edition
  Hardware: Computers that operate on Microsoft Windows 2000
            Professional/Server and Microsoft Windows XP
            Professional/Home Edition
  Printers: LBP-2810/2710/2360/2300/2260/2200/2160/2050/2040/2030
            LBP-1910/1810/1710/1610/1510/1310/950/930/930EX/910
            LBP-880/870/850/840/830/750/740/730/720/470/450/430
            CP680 LIPS-C1/B1, CP660 LIPS-B1/A1
            iR105/8500/7200/6000i/6000/5000i/5000
            iR3300i/3300/3250i/3250/2800i/2800/2200i/2200/2000/1600
            GP605/555 LIPS-E1
            GP405 LIPS-D2
            GP405/355/315/255 LIPS-D1
            GP225/220/216/211/215/210 LIPS-B1
            LP3010/3000, NTTFAX D-60

  Note: This printer driver cannot be used to print from a Client
  machine in any operating system other than the ones described
  above.

3. Printer Driver Installation Methods

The printer driver must be installed in Windows before the
Printer can output a print job. Follow one of the procedures
below to install the printer driver. In order to install the
printer driver, you must log into the system as an Administrator.

Note:

1 If you are using a printer via a local connection, some
  printers may not allow you to use the Plug & Play installation.
  If you install the printer driver with Plug & Play, the
  Microsoft driver for the printer will be installed. Please
  follow the procedure under "Installing the Printer Driver"
  below. However, if you use the Installer to install the printer
  driver, the Plug & Play Wizard will open every time you start
  the computer, so be sure to use the Add Printer button in the
  Printers window to install the driver.

2 If a Windows NT 4.0 printer driver for LIPS is already
  installed, uninstall this printer driver before you install the
  Windows 2000/XP printer driver.

3 When you perform the printer installation with the Add Printer
  button in the Printers window, a dialog box may open to tell
  you that the digital signature cannot be found. In this case,
  just click the Yes button and continue with the installation.
  The printer driver is installed normally.

4 Shut down all other software applications running in the
  background before you install the printer driver. Make sure
  that no other printer driver is open.

Installing the Printer Driver

To install the printer driver with the Installer (other than USB
connection):

1)  Double-click the Setup.exe icon to start the Installer.
    In some systems, the Setup.exe icon may be labelled "Setup".

2)  When the Wizard opens, click the Next button.

3)  The licensing agreement appears. After reading through the terms
    of the license, select "I accept the terms in the license
    agreement" to confirm your agreement, then click the Next button.

4)  At the USB connection screen, make sure that the "Install
    Printer Driver Installer through a USB Connection" check
    box is clear.
   * If a USB Class driver is already installed, the screen does
     not appear at this step.

5)  At the processing selection screen, select the "LIPS4 Printer
    Driver" check box, then click the Next button.
    To acquire the device information, perform calibration, or to
    use the system administrator functions, select the Canon
    NetSpot Suite Service check box.
    * If Canon NetSpot Suite Service is already installed, this
      Wizard will not open. Go to the next step.

6)  At the processing selection screen, select the installation
    method, then click the Next button.
    * This Wizard screen appears only if you are using an older
      version of printer driver. If you are installing the
      printer driver for the first time, go to the next step.

7)  At the printer selection screen, click the Add/Delete button

8)  select the printer to install from the printer list, then
    click "Add to the Printer List for Driver
    Installation".

9)  Click "OK" to return to the Wizard.

10) The Install Printer List appears. Confirm your selection then
    click the Next button.

11)   From the Port Settings list, select the port where the
      printer is connected, then click the Settings button. The
      next dialog box opens so you can set the port.
      Use Standard Port: Use for LPT or pre-set LPR port etc.
      Use Network Printer:  Use for a printer shared on a network.
      Add Port: Use to add a new LPR port etc.

12)   Enter the name of the printer in the Printer Name text box.
      If you want to use the printer as the default printer,
      select "Set as default", and click "Next".

13)   Check all the installation settings, then click "Start".

14)   After reading the next message, "Unable to cancel setup
      after setup is started. Are you sure you want to start
      setup?," click "Yes" to start the installation.

15)   When the installer is finished, a message prompts you to
      read the Readme.txt file. Click "Yes, then read the Readme
      file.

16)   When the installation is finished, the setup screen opens.
      Make sure that "Yes, I want to restart my computer now" is
      selected, then click the Exit button.

This completes installation of the printer driver using the Installer.

To install the printer driver with the Installer for a USB
connection:

1)  Make sure that the USB cable is disconnected from the computer.
    (The USB cable must be connected to the computer at Step 6.)

2)  Double-click the Setup.exe icon to start the Installer.
    * In some systems, the Setup.exe icon may be labelled "Setup".

3)  When the Wizard opens, click the Next button.

4)  The licensing agreement appears. After reading the terms of
    the license, click "I accept the terms in the license
    agreement" to confirm your agreement,then click "Next".

5)  At the USB connection screen, select the "Install Printer
    Driver Installer through a USB Connection" check box.

6)  When the start installation screen opens, make sure that the
    USB cable is connected to the printer then connect the other
    end of the USB cable to the computer to start the installation.

7)  When the installation is finished, the setup screen opens.
    Make sure that "Yes, I want to restart my computer now" is
    selected, then click the Exit button.
    * For some printer models, the Plug & Play feature may
      automatically start the installation of the standard
      Windows XP printer driver.

This completes installation of the printer driver with the
Installer for a USB connection.

To install the printer driver in the Printer Window with the Add
Printer icon:

1)  On the desktop click the Start button, point to Settings,
    then click Printers to open the Printers window.
    * If you are using Windows XP Professional: Start> Printer
      and Fax.
    If you are using Windows XP Home Edition: Start> Control
    Panel> Printer and Hardware> Printer and Fax

2)  Double-click the Add Printer icon to start the Add Printer
    Wizard. Follow the Printer Wizard instructions to complete
    the installation.

3)  When you need to select the name of the printer, select Have
    Disk.

4)  select the file source for your operating system, click the
    OK button, then click the Browse button and select the name
    of the printer.
    Next, select the name of the printer type and click the Next
    button.

5)  Depending on your system, select whether to use the current
    driver or to replace it with the new driver.
    * At this time, you must replace the existing driver.

6)  Click the Finish button. The printer driver files start to
    copy.

7)  When the installation is finished, restart Windows.

This completes installation of the printer driver from the
Printers window.

Uninstalling the Printer Driver

1)  Double-click the Uninstall.exe icon.

2)  The uninstaller starts. select the name of the printer to
    uninstall, then click "Delete".

This completes the procedure for uninstalling the printer driver.

Note:

o If you click "Clean up", all files related to the
  printer driver, including files in use by other programs, and
  registry information will be deleted. Normally, just click the
  Remove button to uninstall the printer driver.

o Canon NetSpot Suite Service is removed with the printer
  driver during uninstallation. If you do not use the uninstallation
   procedure to remove the driver from the Printers folder
  (the Printer and Fax folder in WindowsXP) Canon NetSpot Suite
   Service remains.

           ===== Using the LIPS 4 Printer Driver =====

1. Print Job Settings

This printer driver provides various features to specify printer
settings. Refer to the following procedures when performing
printer settings.

To perform print settings from the Printers window:
If you use this method to perform print settings, the settings
will remain in effect for every subsequent print job unless you
change them before the start of every print job by following the
procedure described below under "To perform print settings from
the software application".

1)  On the desktop click the Start button, point to Settings,
    then click Printers.

2)  Double-click the icon of the printer.

3)  From the Printer menu, select Properties and perform the required settings.
    If you select Printing Preferences from the Printer menu, you
    can set up the default settings that will remain in effect
    for every print job. In order to perform these settings, you
    must have full access rights to the system, i.e. you must be
    logged on at the the system administrator level.

4)  When you are finished, click the OK button.

To perform print settings from the software application:

The settings performed using the procedure below are enabled only
for the next print job. The settings are not saved after the
software application is closed.

1)  In the software application, start the print job. (For
    example, from the File menu select Print.)

2)  In the Print dialog box select the name of the printer to
    use, then click the Properties button.

3)  Perform the required printer settings.

4)  When you are finished, click the OK button.

Displaying the online Help

Refer to the Help file for details on how to set the settings.
When you click the "?" mark in the upper right hand corner of a
dialog box, and then click an item, a explanation of that item
appears. When you click the Help button, information about the
printer driver appears.

2. Cautions, Limitations, Restrictions

Note the following limitations when using the printer driver or 
printing a document.

o If you are using form files for overlays, a file location outside the Windows
  NT directory cannot be specified for the location of the form
  file created.

o If the software application supports printing multiple copies,
  you can perform this setting in either the software application
  or the printer driver.

o When printing with High Quality (Quality> Print Details> Mode
  Details> High Quality), the printer executes a portion of the
  print job using halftone processing. This may change output
  compared to printing with 1BPP.

o If external and extended characters are specified as printer
  fonts, printout results are different from what appears on the
  monitor. For these fonts, specify TrueType fonts.

o When setting scaling with an application, make sure the printer
  driver scaling is set to 100%.

o Printer fonts cannot be printed when using the Raster Mode
  (Quality> Print Details> Graphics Mode> Raster Mode). When
  documents with printer fonts specified in LIPS Mode are printed
  in Raster Mode, fonts will be replaced by fonts other than
  printer fonts.

o For print jobs using the Substituting TrueType fonts function,
  the TrueType fonts on the monitor can be replaced by printer
  fonts. When this function is used, printout will differ from
  what appears on the monitor. Do not use this function when you
  want printout the same as what appears on the monitor.

o When a printer overrun error occurs during printing, do not use
  bi-directional support (refer to previous items on settings),
  or press the Setup button on the printer, and select: PRINT
  QUALITY> banding> OFF

o Printing may be interrupted when the "23 DOWNLOAD MEMORY FULL"
  or "30 MEMORY FULL" message appears. If this occurs, in the
  Misc. sheet in the Details dialog box, click the Use TypeWing
  off, and then print.

o When printing in the AUTO EMULATION mode, the "N201" message
  may appear briefly.

o Some applications have a function for collating. Do not use
  this function when specifying 2 Page per Sheet or 4 Page per
  Sheet in the Page Layout option in the Page Setup sheet. The
  layout may not be set correctly when this function is used with
  these Page Layout options.

o When using Scaling or the 2 Page per Sheet/4 Page per Sheet
  functions, an error occurring from the difference between the
  degree of scaling and resolution may cause lines and other
  distortions to appear in the printout.

o You can use a form file created with the Canon LIPS 3 printer
  driver for overlay printing, but the results of the printout
  could be slightly different.

o When Normal is selected as the Overlay Type for overlay
  printing, with some form files printing may continue after the
  last page.

o For some computers, when a print job is cancelled, the next
  print job may not print correctly because a reset printer
  signal is not sent from the computer. After canceling a print
  job, always reset the printer before starting the next print
  job.

o Some applications may not correctly print lines which are nearly,
  but not perfectly, horizontal. If this occurs, re-draw the lines.

o When overlay printing with some applications, form data may not
  be printed because the document sent overwrites the previous
  document.

o For some applications, LIPS Mode may require extra time when
  printing. If this occurs, select Raster Mode (Quality> Print
  Details> Graphics Mode> Raster Mode).

o Immediately after installing a printer driver (including
  upgrades), some applications may not recognize new functions.
  For all applications with a printer setting function, from the
  File menu select Printer Settings, and then click the OK
  button.

o When Raster mode is selected (Quality> Print Details>
  Graphics Mode> Raster Mode), fine solid lines may become dotted
  or may not print. If this occurs, in the Matching sheet in the
  Grayscale Settings dialog box, select Saturation for Matching
  Method, and then print.

o Depending on the system environment (amount of memory
  available, etc.), print jobs may be erased when the EMF
  Spooling check box is clicked (Printers folder> File>
  Properties> Details> Spool Settings> Spool Data Format). This
  problem may be solved by increasing the computer memory.

o When LIPS Mode is selected (Quality> Print Details> Graphics
  Mode> LIPS Mode), if Meta File Spooling is selected (Document
  Properties dialog box> Quality> Print Details> Advanced
  Settings> EMF Spooling), this could slow the printing speed. In
  this case, clear the EMF Spooling check box.

o When binder printing with the Microsoft Binder, clear the
  check box for executing binder printing as one job. Each print
  job will be processed as a separate print job.

o Watermarks cannot be used with Freelance 97.

o When a watermark is selected which has too many letters, or with
  letters in very large font sizes, the watermark may not print.

o Watermark text including character code F040 and higher external
  characters will not be printed.

o For some applications, watermarks may print incorrectly for the
  first printing.

o If you are using Flash Buddy, do not register more than seven
  files.

o Printing may not be possible when using a custom made Profile
  with another device because the paper cassette supports a
  different paper size. If this occurs, use scaling or change the
  paper cassette.

o When changing the printer name in the Printer dialog box, the
  custom Profile settings for the printer driver are deleted.
  Before changing the name, save the Profile settings as files
  and upload them after changing the printer name.

o When 600 dpi or 1200 dpi is selected in the Quality sheet, data
  can be printed in 600dpi or 1200dpi mode. Both the computer and
  printer require considerable amount of memory when printing in
  600dpi or 1200 dpi mode. When the computer has insufficient memory,
  or when many applications are in use, the applications may not
  function properly. If this occurs, restart Windows and close
  any applications not in use. Also, if the printer is not
  printing correctly in the 600 dpi or 1200 dpi mode, lower the
  resolution.

o When printing color image data (color bitmap) or printing on
  large paper sizes, clean output may not be possible because the
  printer is operating with insufficient memory. If this occurs,
  select 300 dpi for the Resolution and use a different printing
  mode, or add printer memory.

o When 600 dpi or 1200 dpi is selected as the Resolution in the
  Quality page, and when printing reduced scaling color image
  data, 1-dot wide lines and points may not print.

o When Transparencies is selected as the Paper Type in the Paper
  Source sheet, make sure that Multi-purpose Tray is selected as
  the Paper Source.

o If you are using the printer with the Paper Name selected and
  multiple prints selected at "Paper Selection" for "Feed from the
  Same Source", the print job may not execute correctly if Rotate
  is selected for the Output Method.

o When Divide into Sets is selected for the Booklet Printing
  Method in the Detailed Settings of the Booklet Printing dialog box,
  and Different for Cover and Others is selected for the Paper
  Selection in the Paper Source sheet, the Booklet Printing
  Method automatically selects Same Pages for All Pages.

o The operating system environment settings may not be correct
  for the network if you are using an older version of the
  printer driver, earlier than Ver. 2.xx, with the same shared
  printer. Make sure the device selection on the Configuration
  sheet is correct before you start the print job.

o With Resolution set for 1200 dpi, print jobs enlarged for
  printing on A3, A4, and Ledger paper sizes may not print. If
  this occurs, lower the Resolution setting or lower the rate of
  enlargement.

o Some applications have a function for collating. Do not use
  this function when specifying 2 Page per Sheet or 4 Page per
  Sheet in the Page Layout option in the Page Setup sheet. The
  layout may not be set correctly when this function is used with
  these Page Layout options.

o When using Scaling or the 2 Page per Sheet/4 Page per Sheet
  functions, an error occurring from the difference between the
  degree of scaling and resolution may cause lines and other
  distortions to appear in the printout.

o Depending on the setting selected for Spooling at Host in the
  Device Settings page, booklet printing results may vary in the
  following situations:
  - When Spooling at Host is disabled: The Output Size will be
    twice the size of the Page Size specified in the Page
    Settings sheet. For example, when A4 is selected as the Page
    Size, 4 A4 sized images are output on an A3 size page.
  - When Automatic/Spooling at Host is enabled: The output will
    be printed in the Output Size specified in the Page Settings
    sheet. For example, when A4 is selected as the Output Size, 4
    A5 size images are output on an A4 size page.

o For some applications, when using functions such as Scaling, N
  Pages per Sheet, and Edging, output with graphics data may diverge
  from the original. If this occurs, under Spooling at Host in
  the Device Settings sheet, select Disable.

o When Spooling at Host is enabled in the Device Settings sheet,
  do not change the printer resolution settings while printing
  in the background with Microsoft Word 98. Doing so may cause Windows to
  operate erratically.

o When printing with the Adobe Acrobat Reader with Spooling at
  Host enabled in the Device Settings sheet, the print fonts may
  change. If this occurs, disable Spooling at Host, and then
  print.

o If the Client is connected via Windows NT 3.51 Server, perform
  the installation of the printer driver as Local for a Windows
  XP Client, then specify the shared printer on the  network and
  execute the print job.

o Do not use this printer driver as a substitute for installing
  Windows NT 3.51. If the network includes Windows NT 3.51
  Clients, install the machines as Local Clients with the Windows
  NT 3.51 installer, then specify the shared printer on the network
  and execute the print job.

o When using Microsoft Excel, all sheet data may not be delivered
  to a Mail Box if several sheets are sent simultaneously. If
  this occurs, send the sheets to the Mail Box one by one.

o When using Microsoft Excel to print multiple copies with the
  Collate check box selected, or when printing an entire workbook
  with different settings on each sheet, the printer may not be
  able to perform Staple/Offset printing, N-up printing, or Print
  on Both Sides. Also, if you execute a secured or job accounting
  print job, several confirmation dialog boxes may be displayed.

o If Collate is selected in the application for a multiple copy
  print job, the staple and collate settings in the printer
  driver may not execute correctly. If this occurs, remove the
  multiple copy settings in the software application, select 
  "Collate on" in the Finishing page, and select Sort or Staple to
  execute the print job correctly.

o Some printers connected as local printers to a computer may not
  execute print jobs correctly if the bi-directional support is
  disabled. In the Printer Properties sheet, click the Details
  tab, click the Spool Settings button, and then select "Enable
  bi-directional support for this printer."

o If the Collate feature in Adobe PageMaker is selected, the
  Collate setting in the printer driver is ignored.

o When Novell Client for Windows NT/2000 Ver. 4.71 is used in a
  NetWare environment, in the Port page of the Printers folder,
  the Port selection and display may not display correctly or be
  available for selection. However, print jobs will execute
  normally.

o When you are using Novell Client for Windows NT/2000 Ver. 4.71
  on a Client in the NetWare environment, you cannot use NetWare
  Printer Manager to install correctly. At the same time, even if
  the system is set for the System Administrator to download the
  printer driver, the drive cannot be installed correctly. Please
  install the printer driver from the Printers folder, or use the
  LIPS 4 Installer.

o When feeding pre-printed covers during booklet printing, if the
  covers in reverse, remove the covers from the inverter and
  reverse their position.

o With NetSpot Suite and NetSpot Suite Service installed with a
  USB printer in use, do not use the stand-by mode. The stand-by
  mode can be set in the Control Panel (Start> Settings> Control
  Panel> Power Options).

o The positions for saddle-stitching may not align correctly
  during booklet printing if Finishing> Print With Mixed Paper
  Sizes/Orientations is checked on. In this case execute Device
  Settings> Spooling at Host then select Auto or Disabled.

o If this printer driver cannot be installed correctly in a
  NetWare environment, first remove the old printer driver then
  install the new printer driver from the Printers folder with
  the Add Printer icon.

o If you are using a printer model that does not support the
  overlay device registration function, do not attempt to
  register forms on the device.

o If you are using a color printer installed from the Printers
  folder with the Add Printer icon, and if you change a color
  profile or add a new profile, the system may switch
  automatically to ICM (Image Color Matching) on the host side.
  (Normally, the default is set Quality> Color Settings> ICM
  Method> ICM Disabled.)

o If you are using Microsoft Excel, if you select All Books in
  the Print dialog box, execute the print job with the first
  sheet selected. If you execute the print job with the second
  sheet selected, the settings (staple, sort, etc.) on the
  Finishing sheet are ignored.

o If you are using NDS (Novell Directory Services) or NDPS
  (Novell Distributed Print Services) in a NetWare environment,
  install the printer driver from the Printers window. On the
  desktop click the Start button, point to Settings, click
  Printers, then double-click the Add Printer icon to start the
  installation. Using the Installer for the installation may not
  execute correctly in all cases.

       ===== Limitations of Specific Printer Models =====

o LBP-730 Ver. R.105
When Landscape Orientation is used for 4 Pages per Sheet, the
actual printout result will be Portrait Orientation rotated 90
degrees clockwise. In order to check the printer version, execute
Status Printing.

o LBP-930EX
With the LBP-930EX, when Stack Bypass (Multi-purpose Tray) is
selected as the Paper Source in Paper Selection, stapling may not
be possible.

o LBP-1810/1610/910/880/850/840
When printing with the Custom Paper Size, available sizes vary
depending on where the paper is fed, such as Bypass (Multi-
purpose Tray) or optional 500 Sheet Cassette. Print from a paper
source that can feed the Custom Paper Size. With the 500 Sheet
Cassette, use a Custom Size Paper wider and longer than 210.0mm,
and with a length longer than the width. Refer to the Help for
more information.

o GP605-255
When Rotate is selected on the Finishing page, make sure that the
Paper Name item is deselected on the Feed Page.

o iR Series
- When print data are saved to the mailbox and Finishing is turned off,
  with some iR Series printers the number of copies may not
  display correctly on the printer operation panel. When print
  data is saved to the mailbox, make sure that Finishing is set
  to a setting other than off.
- When print data are saved to the mailbox with some iR Series
  printers, some printer operations, such as the output
  selections (1-Sided/2-Sided), the output tray selection, page
  layout, scaling, and so on, may not display correctly on the
  printer operation panel. However, the print jobs will execute
  correctly.
- When print data are saved to the mailbox in Landscape
  orientation with some iR Series printers, the actual staple
  position may not match the position specified in the printer
  driver. Also, if the staple position is specified on the
  printer operation panel for print data saved to the mailbox in
  Landscape orientation, the actual staple position may be higher
  or lower than the position specified in the printer driver.

o iR6000/5000
The most recent version of this printer driver is required in
order to use the following features. Also, the layout positions
may be slightly different for execution of Page Layout (2 Pages
per Sheet, 4 Pages per Sheet)
- Matching paper sizes (Finishing> Print With Mixed Paper
  Sizes/Orientations)
- CFR-M1 optional fonts (Configuration> Font Setting> Optional
  Font)

                  ===== Customer Service =====
If you have questions about how to use the software, or if any
point is unclear, refer to the contact list in the operating
instructions and contact the service center nearest you.
You can also find more information about software on
the Canon Home Page (http://canon.jp/).

                   ===== NOTHING FOLLOWS =====